{"title":"Eurorack Accessories","description":"","products":[{"product_id":"doepfer-ad5","title":"Doepfer - AD5","description":"\u003cp\u003e\u003cb\u003eManufacturer Description\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5v low-cost adapter\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e+5v@100 ma plug-in module; instead of a separate +5v power supply, this module can be plugged into a free socket on the bus board; for modules which require +5v (e.g. a-113, 190, 191), the current is taken from the 12v supply!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eImportant technical note: Do not install the A-100AD5 when the A-100PSU3 is used ! This may damage the A-100PSU3 and\/or the A-100AD5 !\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":9070241120303,"sku":"","price":19.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/ad5.jpg?v=1536184958"},{"product_id":"doepfer-diy-synth-kit-w-tempco","title":"Doepfer - DIY SYNTH KIT w\/TEMPCO","description":"\u003cp\u003eLow cost DIY kit to build a full-fledged analog synthesizer. The kit is made of an assembled and tested pc board that includes all that is necessary to build a standard analog synthesizer.\u003c\/p\u003e\n\u003cp\u003eWith temperature stability\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Optional Cable Set is available to wire the DIY Synth Kit)\u003c\/strong\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"DIY Synth Board","offer_id":36557020823709,"sku":"","price":150.0,"currency_code":"USD","in_stock":false},{"title":"DIY Synth Cable Set","offer_id":36557020856477,"sku":"","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/DIYSYNTH.jpg?v=1602106056"},{"product_id":"doepfer-a-100bus-v6","title":"Doepfer - A-100Bus v6","description":"\u003cp data-mce-fragment=\"1\"\u003eAn assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for connection to +\/-12V power supply (4 wires with flat connectors on both ends, length about 30cm), but no mechanical parts (e.g. screws, spacers, nuts, washers).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn the new version of the A-100 bus board (labeled Version 6 \/ 2019) boxed pin headers are used which are equipped with a reverse protection (gap for the “nose” of the socket of the bus cable). When the bus cable coming from the module is connected to the boxed header in question the “nose” has to point to the right. The polarity of the cable is correct if the red wire of the bus cable then points to the bottom (to the continuous line labeled “RED WIRE” on the pc board). If this is not the case please do not connect the module to the bus board ! Otherwise both the module and the power supply (A-100PSU3) may be damaged !  In that case please contact the manufacturer of the module and ask for a suitable bus cable with the correct polarity of the connector. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003eThe bus cables of original A-100 modules manufactured by Doepfer are equipped with suitable bus cables since 2012. Only for older A-100 modules manufactured before 2012 it may happen that the polarity of the 16 pin female connector of the bus cable is wrong (nose points to the left when red wire points to the bottom). This is because in the past unboxed pin headers were used and the position of the “nose” did not matter. In such a case please contact Doepfer or one of their dealers and order a suitable bus cable. \u003c\/p\u003e\n\u003chr class=\"line\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions: 390mm x 43mm x 15mm Connections: 14 connectors for modules 4-fold connector for power supply\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":36557173227677,"sku":"","price":46.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/A-100Bus.jpg?v=1602107148"},{"product_id":"doepfer-usb64-no-psu","title":"Doepfer - USB64 (NO PSU)","description":"\u003cp data-mce-fragment=\"1\"\u003eUniversal MIDI Control Electronics with 64 inputs\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e64 inputs, alternatively analog (0...+5V, e.g. generated by rotary or fader potentiometers, same as Pocket Electronic) or digital (e.g. generated by momentary or toggle switches\/buttons, same as CTM64)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ein analog mode Midi control change messages are generated, resolution 7 bit (Midi data range 0-127) - in digital mode note on\/off or program change messages are generated\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003einputs via eight pin headers with 10 pins each (same pinout as Pocket Electronic), 10 pin ribbon cables with suitable female connectors are plugged to the pin headers, the ribbon cables are included with the USB64 (about 30 cm each), the other side of each cable is open to connect the desired controls\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUSB and Midi interface (Midi out \u0026amp; Midi in)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003epower supply alternatively via USB or external power supply during pure Midi operation without USB, (automatic selection)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ebasic parameters (e.g. analog\/digital mode, Midi channel, Midi note\/program change\/control change range 0-63 or 64-127 etc.) selectable via jumper\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eupdate of the USB64 firmware via USB (e.g. in case of a firmware update, for this a PC with Windows XP and USB interface is required), as soon as an update is available it can be downloaded from our download page\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003econtrol LED\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003emeasures of the pc board: about 160 length x 55 width x 30 height (measures in mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003escope of supply: USB64 pc board (completely assembled and tested), eight 10 pin ribbon cables with female headers (about 30 cm each), USB cable (A-B type)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRemark: USB64 is not suitable for rotary encoders (sometimes even called endless potentiometers). For this appliction the Dial Electronic has to be used as these controls are no real potentiometers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFirmware update over USB\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUSB compatible with USB Device Class for Midi Device and tested operating systems USB64 is a so-called OEM or DIY product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eElectronic basic knowledge is required to install the board. If you are not sure if your knowledge is sufficient please consult an expert.\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":36557425737885,"sku":"","price":175.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/USB64.jpg?v=1602108697"},{"product_id":"doepfer-pocket-electronics-no-psu","title":"Doepfer - Pocket Electronics (NO PSU)","description":"\u003cp data-mce-fragment=\"1\"\u003ePocket Electronic is an universal electronics DIY kit to built your own MIDI control box. Up to 16 controlling elements can be connected to PE transmitting 16 different MIDI messages on different (or even the same) MIDI channels.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEssentially it contains the electronics core of Pocket Control resp. Pocket Fader but without the 16 controls (i.e. without rotary potentiometers resp. faders). Concerning the MIDI functions PE is identical to Pocket Control resp. Pocket Fader (these two devices are no longer available).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eInstead of this PE is used to connect up to 16 controlling elements (e.g. rotary potentiometers, fader\/slider potentiometer, touch switches, toggle switches, foot switches, foot controllers). The controlling elements are not included but have to be added by the customer. The MIDI data range is 0...127 with 7 bit resolution. The connection of the controlling elements is described in detail in the PE user's guide.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEven voltages sources can be used instead of the controlling elements provided that the voltages applied are strictly within the range 0...+5V (referenced to PE GND) ! Voltages beyond this range will destroy the electronics ! The voltage range 0...+5V corresponds to a MIDI data range of 0...127 (7 bit resolution).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 16 controlling elements resp. control voltages are connected to two double row pinheaders (10 pins each). To these headers two 10 pin ribbon cables are connected. The controlling elements are connected to the free ends of the ribbon cables. In this way the controlling elements can be pulled off from the electronics.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor operation a momentary switch and a LED are used. They are connected via cables to a 4 pin connector on the pc board.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe following Midi messages can be generated: any controller, after touch, pitch bend, common RPN resp. NRPN controller, but no SysEx messages\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e128 presets with useful assignement of MIDI events to the 16 controlling elements (e.g. current software synthesizer, XG controller, 16 x volume on the 16 MIDI channels and so on), for nearly each application there is something 'on board'\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSelection of the desired preset after power on is adjusted with a 8 pin DIP switch\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn addition the desired preset can be chosen with an incoming MIDI program change message\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe free editor program (PC version) enables the user to program his own 128 presets. Sorry - a Mac version is not available.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePE is equipped with MIDI In and MIDI Out. The incoming MIDI messages are merged to the data generated by PE- provided that the incoming Midi data range is not too big. In this way several PE can be linked together to obtain larger controller arrays with more than 16 elements. Even the combination of PE and CTM64 is possible to add controller events to the note or program change events generated by CTM64.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePE is available only as an assembled and tested pc board. The pc board measures are about 80 mm (length) x 56 mm (width) x 30 mm (height). Five mounting holes with 3 mm diameter are available for mounting the pc board to a suitable base e.g. with distance sleeves or spacers and screws. PE includes two 10 pin ribbon cables (about 30 cm each), button and LED (snapshot function) and within Germany even the power supply.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe do not offer a suitable housing as this would have to be completely different for various combinations of controlling elements. - An external power supply (7-12VDC@min. 100mA) is used.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eElectronic basic knowledge is required to install the PE electronics and to connect the controlling elements resp. control voltages. If you are not sure if your knowledge is sufficient please consult an expert. We cannot take back modules that became defective because of wrong installation or wrong connection of the controlling elements or voltages. We also cannot take back modules or cables which have been soldered by the user.\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":36557541245085,"sku":"","price":92.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/PocketElectronics.jpg?v=1602109350"},{"product_id":"doepfer-mtv16-midi-to-voltage-interface","title":"Doepfer - MTV16 MIDI-to-VOLTAGE INTERFACE","description":"\u003cp data-mce-fragment=\"1\"\u003eMidi-to-Voltage Interface with 16 Analog Voltage Outputs\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003einterface to convert midi control changes messages (sometimes called simply \"midi controllers\") to analog voltages\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e16 analog voltage outputs 0 ... +5V (0V corresponds to midi data 0, +5V corresponds to midi data 127)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eresolution of the voltages: 128 steps or 7 bit (based on the 7 bit midi data)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ethe voltages are available as two pin heades with 10 pins each, each pin header has available 8 voltages and GND on two pins\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003etwo 10-pin ribbon cables (about 30 cm) with a suitable female connector on one side are included, the other sides of the cables are left open (for free wiring of the control voltages)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ethe voltages are controlled by 16 subsequent midi control changes messages on the same midi channel\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ethe midi channel is adjusted by means of four jumpers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ethe control change number of the first output can be set to 0, 16, 32, 48, 64, 80, 96 or 112 by means of three jumpers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003econnectors for power supply, midi in and midi out are available as sockets on the pc board MTV16 is equipped with Midi In and Midi Thru. The incoming Midi messages are forwarded to the Thru output without any changes. In this way several MTV16 can be linked together. An LED is used to indicate the Midi activity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAn external power supply (7-12VDC@min. 100mA) is used. The wall outlet power supply adapter for 230V mains voltage and European type mains plug is not included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMTV16 is available only as an assembled and tested pc board. The pc board measures are about 78 mm (length) x 67 mm (width) x 30 mm (height). Several mounting holes with 3 mm diameter are available for mounting the pc board to a suitable base e.g. with distance sleeves or spacers and screws. We do not offer a suitable housing as this would have to be completely different for various applications. Electronic basic knowledge is required to install the MTV16 electronics and to connect the controlling elements resp. control voltages. If you are not sure if your knowledge is sufficient please consult an expert.\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":37534390583466,"sku":"","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/MTV162.jpg?v=1604956025"},{"product_id":"doepfer-mtc64-midi-to-contact","title":"Doepfer - MTC64 Midi-to-contact","description":"\u003cp data-mce-fragment=\"1\"\u003eMTC64 is an universal MIDI interface that converts up to 64 succeeding MIDI note on\/off or program change messages into 64 TTL voltages (0\/+5V).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe TTL outputs of the MTC64 can be used to control different switching functions. With suitable drivers (e.g. switching transistors) relays, lamps, motors, electromagnets, magnetic valves and so on can be controlled. A suitable driver board with 16 outputs (max. load 40V\/500mA for each output) is available as option. Four of these boards are required to drive all 64 outputs of the MTC64.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMTC64 has two different modes: note or program change mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- In the note mode incoming MIDI note on\/off messages control the 64 TTL outputs provided that the MIDI channel and note range correspond to the settings of the MTC64. A note on message will set the corresponding TTL output to a high level (+5V), the note off message will reset the output to a low level (0V). With an additional jumper this bevaviour can be set to the other way round (note on = low, note off = high) if reversed outputs are required. In the program change only one of the 64 outputs is activated. The number of the activated output is identical to the program change number received at the MIDI input. The note offset (i.e. the MIDI note number assigned to the first output) can be set to 0 or 36 with another jumper. With two more jumpers one can transpose up\/down one octave, i.e. +12\/-12 semitones. Thus the note offsets 0, 12, 24, 36 and 48 are obtainable. If another note offset is required the unused outputs remain unconnected.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- In the program change mode the offset can be set to 1 or 64, i.e. setting the program number range to 1-64 or 65-128 (0-63 or 64-127 in MIDI code). With two daisy-chained MTC64 the whole program number range 1-128 is covered. Alternatively a range switch can be used instead of the range jumper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe MIDI channel for all messages processed by the MTC64 is set with the last 4 jumpers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 64 TTL outputs are available as four double row pin headers with 16 pins each. 16 pin socket-connectors with flat cable can be connected to these pin headers (not included with the MTC64). Additionally there are some GND pins available (as solder pins and as additional pin header with 10 pins) as a GND reference level is required for the devices controlled by the MTC64 outputs.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMTC64 is equipped with MIDI In and Thru. The incoming MIDI messages are passed to MIDI Thru. In this way several MTC64 can be linked together.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMTC64 is available as an assembled and tested pc board only. The pc board measures are about 105 mm (length) x 70 mm (width) x 30 mm (height). Several mounting holes with 3 mm diameter are available for mounting the pc board to a suitable base e.g. with distance sleeves or spacers and screws. We do not offer a suitable housing as the MTC64 is normally installed into the housing of the device to be controlled by MTC64.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAn external power supply (7-12VDC@min. 250mA) is used. This is not included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA connector set suitable for MTC64 is available at extra charges. This includes four 16 pin flat cables with 16 pin socket connectors at one end and one 10 pin flat cable with 10 pin socket connector at one end. The length for all cables is about 50cm. Electronic basic knowledge is required to install the MTC64 boards. If you are not sure if your knowledge is sufficient please consult an expert.\u003c\/p\u003e\n\u003chr class=\"line\" data-mce-fragment=\"1\"\u003e","brand":"Doepfer","offers":[{"title":"MTC64","offer_id":37534519296170,"sku":"","price":121.0,"currency_code":"USD","in_stock":false},{"title":"Cable Set","offer_id":37534530338986,"sku":"","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/MTC641.jpg?v=1604958001"},{"product_id":"doepfer-vfp2-double-foot-switch","title":"Doepfer - VFP2 double foot switch","description":"\u003cp data-mce-fragment=\"1\"\u003eVFP2 double foot switch\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eabout 1m cable length\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003estereo jack plug 1\/4\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 contacts closed at rest (suitable e.g. for LMK4+, LMK2+, PK88, or A-177)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003edimensions: 20 x 22 x 6 cm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":37549376602282,"sku":"","price":69.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/VFP.jpg?v=1605059693"},{"product_id":"doepfer-mke-universal-midi-keyboard-electronics","title":"Doepfer - MKE Universal Midi Keyboard Electronics","description":"\u003cp data-mce-fragment=\"1\"\u003eDoepfer MKE is an Universal Midi Keyboard Electronics to built custom-made Midi controllers that include a keyboard. Combining the MKE with our controller electronics Pocket Electronic, Dial Electronic, CTM64 or MTC64 allows the construction of an unique Midi controller that exactly meets the requirements of the user.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese units can be connected to MKE:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStandard keyboard manufactured by FATAR\/Italy with 2, 3, 4 or 5 octaves (keyboard types TP6, TP60...64, TP\/7, TP\/8 or TP\/9, with velocity)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePitch bend wheel (special spring-loaded rotary potentiometer)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eModulation wheel (special rotary potentiometer)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRemark: Because of technical reasons only the single modulation wheels of our accessories list can be used in combination with MKE but not the modulation wheel set !\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRotary or fader potentiometer for loudness\/volume control (Midi CC#7)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter touch sensor or socket for sustain switch or another potentiometer for any Midi controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe MKE pc board has these controls available:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6 black rectangle momentary buttons (about 12 x 22 mm) with integrated LEDs (measures of the complete button area about 76 x 22 mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3-digit LED display (about 19 x 38 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 6 buttons are used to control these parameters:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMidi channel 1...16\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTranspose (lowest note in octave intervals, 0-12-24-36-48-60)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProgram change 0...127\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eController number 0...127 resp. After touch\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUp (increment of the value shown in the display)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDown (decrement of the value shown in the display)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn addition one can select between dynamic and non-dynamic operation. In the non-dynamic mode the (fixed) velocity value can be adjusted. MKE has a non-volatile memory for the parameters Midi channel, transpose, program number, controller number and dynamic\/non-dynamic mode. After the next power on the previous values are called up.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMKE is equipped with Midi In and Midi Out. The data appearing at the Midi in are merged to the data generated by the MKE. Consequently several MKE can be daisy-chained or combined with other OEM controllers (e.g. Pocket Electronic, Dial Electronic, CTM64 , MTC64) to built a custom-made Midi controller.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMKE is available only as an assembled and tested pc board. The pc board measures are about 71 mm (length) x 85 (width) x 45 mm (height). Four mounting holes with 3 mm diameter are available for mounting the pc board to a suitable base or front panel e.g. with distance sleeves or spacers and screws. We also offer keybeds and cable sets that are suitable for MKE.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease specify the type of keyboard that has to be connected to MKE (2\/3 or 4\/5 octaves). This is necessary as the keyboards have different types of connectors. If no specifications are made the MKE is delivered in the 4\/5 octave version. If you have no keyboard available we recommend to order the keyboard together with the MKE as in this case all components (MKE, keyboard, cable set) can be harmonized. The cables leading to the keyboards are not included and have to be ordered in addition. We do not offer a suitable housing as this would have to be completely different for various combinations of keyboards and controlling elements.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAn external power supply (7-12VDC@min. 250mA) is used. The wall outlet power supply adapter for 230V mains voltage and European type mains plug is NOT included with the MKE.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eElectronic basic knowledge is required to install the MKE electronics and to connect the controlling elements. If you are not sure if your knowledge is sufficient please consult an expert.\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":37560390910122,"sku":"","price":105.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/MKE.jpg?v=1605141907"},{"product_id":"tangilbe-waves-eurorack-adapter-frame-8u","title":"Tangilbe Waves - Eurorack adapter frame 8U \/ 12U \/ 16U","description":"\u003cp data-mce-fragment=\"1\"\u003eThe AE modular Eurorack adapter frame allows to integrate AE modular modules into eurorack systems. It is basically an empty eurorack-sized frame that can take up to 8\/12\/16 units of AE modules where one \/ two units are occupied by the mandatory POWER or MASTER module. Via the module the frame is powered from the eurorack bus.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe product includes:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe mounting frame with screws for mounting the AE modules\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ethe ribbon cable for eurorack bus connection\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ethe bus cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease note that you have to add a POWER or a MASTER module to this adapter frame to get it working. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Tangible Waves","offers":[{"title":"8U","offer_id":37684957085866,"sku":"","price":30.0,"currency_code":"USD","in_stock":false},{"title":"12U","offer_id":37684957118634,"sku":"","price":32.0,"currency_code":"USD","in_stock":true},{"title":"16U","offer_id":37684957151402,"sku":"","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/AEEURO8U.jpg?v=1607025834"},{"product_id":"doepfer-mod-wheel-kit-single","title":"Doepfer - Mod Wheel kit (single)","description":"\u003cp data-mce-fragment=\"1\"\u003eModulation Wheel kit - single Wheel\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis set of parts consists of a special potentiometer (10k lin) with nut and washer, the actual modulation wheel made of black plastic, the mounting bracket, a rubber buffer (so that the wheel hits the bracket softly), and a return spring with an associated lock washer. The return spring can either be mounted (e.g. for pitch bend) or not (e.g. for modulation, volume etc.).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe whole unit is only available as a parts set. The assembly must be carried out by the customer himself.\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39712077906090,"sku":"","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/DoepferModWheel.jpg?v=1619044510"},{"product_id":"doepfer-a-100-monster-cases-brackets","title":"Doepfer - A-100 Monster Case Brackets","description":"The A-100 monster cases brackets are made to connect two monster cases securely to each other. They come in an angled and straight configuration.","brand":"Doepfer","offers":[{"title":"A-100PMVG Straight","offer_id":41207520297130,"sku":"","price":29.0,"currency_code":"USD","in_stock":false},{"title":"A-100PMVW Angled","offer_id":41207520329898,"sku":"","price":45.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/doepfer-a-100-pmvg-monster-case-joiner-brackets-straight.jpg?v=1630439133"},{"product_id":"doepfer-fp5-foot-controller","title":"Doepfer - FP5 foot controller","description":"\u003cp data-mce-fragment=\"1\"\u003eFP5 foot controller\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eabout 1m cable length\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStereo jack plug 1\/4\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003epotentiometer 10k linear (suitable e.g. for LMK4+\/2+ or A-177)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- dimensions: overall: 25 x 12 x 11 cm (down position) resp. 25 x 12 x 15 cm (up position)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- angle of rotation: 20 degrees\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePin out of the stereo jack plug: left (ccw) terminal of the potentiometer = GND terminal of the jack plug middle terminal (wiper) of the potentiometers = ring of the jack plug right (cw) terminal of the potentiometer = tip of the jack plug\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePay attention that not the full rotating angle of the potentiometer is covered but only about 50%. If the end terminals of the potentiometer are e.g. connected to GND and +5V only a voltage range 0...+2.5V is covered ! Of course the foot control inputs of our keyboards take this special behaviour into consideration but e.g. for DIY\/OEM applications one has to pay attention to the limited rotating angle.\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":41474994765994,"sku":"","price":92.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/FP5.jpg?v=1632960452"},{"product_id":"doepfer-a-100ssb-small-supply-bus","title":"Doepfer - A-100SSB Small Supply\/Bus","description":"\u003cp data-mce-fragment=\"1\"\u003eA-100SSB (Version 1.2) is a combination of power supply and bus board with 12 connectors for A-100 modules.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlanned for applications with up to 12 modules and a max. current of 380 mA. A-100SSB is available as ready built and tested unit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese are the most important features:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ewide range mains voltage input 100-240V AC \/ 50-60 Hz\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIEC inlet on board for the connection of a suitable mains cable (a suitable cable has to be purchased by the customer locally)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eswitching supply with +12V\/380 mA and -12V\/380mA for the operation of A-100 modules up to 380 mA total supply current\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003esafety cover at the bottom side (covers all elements that lead mains voltage)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eon board fuse\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e8 bus connectors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLED displays for +12V, -12V and +5V (+5V are available only if e.g. the 5V adapter A-100AD5 is used)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions: about 270 mm (length) x 55 mm (width) x 35 mm (height)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eseveral 3mm holes for mounting the unit on a rear panel or bottom plate.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42393932562602,"sku":"","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/A-100SSB2.jpg?v=1643245678"},{"product_id":"4ms-flying-bus-cable","title":"4ms - Flying Bus Cable","description":"\u003cp data-mce-fragment=\"1\"\u003eFlying Bus (male pin) are passive power distribution cables that work with our Row Power modules to distribute power to your modules.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCan be daisy-chained if extra headers are needed. One 14\" flying bus cable with 7 male header pin connectors.\u003c\/p\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":43577539199146,"sku":"","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/c9.jpg?v=1665004065"},{"product_id":"4ms-bus-stick","title":"4ms - Bus Stick","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eBus Stick [Bare Headers]\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using un-shrouded headers. Simply connect to a Row Power module using the included cable.\u003c\/p\u003e\n\u003cp\u003eAttaches to your case using adhesive pads (included) or by drilling and screwing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eBus Stick [Shrouded Headers]\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable.\u003c\/p\u003e\n\u003cp\u003eAttaches to your case using adhesive pads (included) or by drilling and screwing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"4ms","offers":[{"title":"Bare Headers","offer_id":43577617744042,"sku":"","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Shrouded Headers","offer_id":43577617776810,"sku":"","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/products\/aa.jpg?v=1665004470"},{"product_id":"doepfer-a-100pcs","title":"Doepfer A-100PCS","description":"\u003cspan data-mce-fragment=\"1\"\u003eA-100PCS power supply protection cover \u003c\/span\u003e\u003cu data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e standard version\u003c\/span\u003e\u003c\/u\u003e\u003cspan data-mce-fragment=\"1\"\u003e (for one A-100PSU2\/PSU3, used in all A-100 cases except the monster cases, A-100LC1, A-100LC3 and A-100MC)\u003c\/span\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":45224230060202,"sku":"","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/files\/zjdezn1jv0sfr0basjc0.jpg?v=1700611581"},{"product_id":"doepfer-a-100-diy-case-kit","title":"Doepfer - A-100 DIY Case Kit","description":"\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003eThe A-100 DIY kit #1 is a combination of components that allows the inexpensive do-it-yourself construction of a case for the A-100:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e \u003c\/p\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNO POWER SUPPLY INCLUDED\u003c\/strong\u003e\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRecommended US Power Supply: Triad Magnetics WAU16-2400\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003ethe external transformer generates a magnetic field and should be located in some distance (especially when modules are installed which are sensitive to magnetic fields like the spring reverb module A-199)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003e2 bus boards\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003efour 84 HP front rails (~ 427 mm length) for mounting of the modules, incl. 8 mounting screws \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003eabout 160 M3 nuts which have to be inserted into the front rails (as the nuts can be slided to any position even modules of other manufacturer with different position of the mounting holes can be assembled without gaps) \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003ecable for connections between power supply and bus boards\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003esketches with measures (for drilling the holes at the right positions for PSU and bus board mounting)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003ebuilding suggestion for wooden case (sketch + list of all required wooden case parts)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003eadditional installation material like screws, nuts or distant bolts (e.g. for bus boards, power supply board, rails) is \u003cu data-mce-fragment=\"1\"\u003enot included\u003c\/u\u003e as these parts depend upon the type of case built by the customer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 100%; word-spacing: 0; margin-top: 0; margin-bottom: 0;\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003eto operate the kit an external transformer with 14-18V\/2.4A \u003cu data-mce-fragment=\"1\"\u003eAC\u003c\/u\u003e is required, the current of the transformer has to be twice the value of the +\/-12V DC current, the max. value is 2.4A (corresponding to 1200mA for +\/-12V DC), even smaller current output is possible; the current output of the power supply is half the current of the external transformer as the currents for both voltages +\/-12V are required (if e.g. the transformer outputs max. 1000mA the max. power supply current is 500mA for +\/-12V)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":45224268660906,"sku":"","price":259.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/files\/A100_DIY_kit_1.jpg?v=1700612163"},{"product_id":"doepfer-mke-complete-kit","title":"Doepfer - MKE Complete Kit","description":"\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #000000;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eMKE complete package \u003c\/b\u003e(MKE kit + front panel kit + keybed 61TP\/8O + cable set + power supply 230V)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMKE is an Universal Midi Keyboard Electronics to built custom-made Midi controllers that include a keyboard. Combining the MKE with our controller electronics Pocket Electronic, Dial Electronic, CTM64 or MTC64 allows the construction of an unique Midi controller that exactly meets the requirements of the user. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThese units can be connected to MKE:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStandard keyboard manufactured by FATAR\/Italy with 2, 3, 4 or 5 octaves (e.g. the keyboard types TP6, TP60...64, TP\/7, TP\/8 or TP\/9, diode matrix type \"DF\")\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePitch bend wheel (special spring-loaded rotary potentiometer)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eModulation wheel (special rotary potentiometer)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eRemark: Because of technical reasons only the single modulation wheels of our accessories list can be used in combination with MKE but not the modulation wheel set, which was available until about 2016 !\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eRotary or fader potentiometer for loudness\/volume control (Midi CC#7)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAfter touch sensor or socket for sustain switch or another potentiometer for any Midi controller\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe MKE pc board has these controls available:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e6 black rectangle momentary buttons (about 12 x 22 mm) with integrated LEDs (measures of the complete button area about 76 x 22 mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003esince August 2014 MKE is equipped with another type of momentary buttons (same as used in A-190-4 or Dark Time) as the so far used buttons are no longer available.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e3-digit LED display (about 19 x 38 mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 6 buttons are used to control these parameters:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMidi channel 1...16\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTranspose (lowest note in octave intervals, 0-12-24-36-48-60)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProgram change 0...127\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eController number 0...127 resp. After touch\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUp (increment of the value shown in the display)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eDown (decrement of the value shown in the display)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIn addition one can select between dynamic and non-dynamic operation. In the non-dynamic mode the (fixed) velocity value can be adjusted. The velocity implementation in the dynamic mode has been optimized for the Fatar keybed 61TP\/9. When other keybeds are used the dynamic behaviour may be not optimal. It's not possible to change the dynamic behaviour for other keybeds.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMKE has a non-volatile memory for the parameters Midi channel, transpose, program number, controller number and dynamic\/non-dynamic mode. After the next power on the previous values are called up. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMKE is equipped with Midi In and Midi Out. The data appearing at the Midi in are merged to the data generated by the MKE. Consequently several MKE can be daisy-chained or combined with other OEM controllers (e.g. Pocket Electronic, Dial Electronic, CTM64 , MTC64) to built a custom-made Midi controller.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMKE is available only as an assembled and tested pc board. The pc board measures are about 71 mm (length) x 85 (width) x 45 mm (height). Four mounting holes with 3 mm diameter are available for mounting the pc board to a suitable base or front panel e.g. with distance sleeves or spacers and screws.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAn external power supply (7-15VDC@min. 100 mA) is used. The pc board is equipped with a standard low voltage connector ( 5.5 mm outer diameter and 2.1 mm inner diameter, polarity: plus = center, minus = ring).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf you want to connect a keyboard to the MKE electronics later you find suitable keyboards and cable sets on the Accessories and Spare Parts page. Even wheels, cable sets for the wheels, volume potentiometer, sustain socket or after touch sensor are available as well. The corresponding prices can be found in the price list (spare parts section) or ask our sales office (sales@doepfer.de).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMKE is a so-called OEM or DIY product. Electronic basic knowledge is required to install the board. If you have no or only little experience with electronics we recommend not to order and not to install the MKE.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe cannot take back modules or carry out warranty repairs of modules that became defective because of wrong installation or wrong connection of the controlling elements or voltages. We also cannot take back or carry out warranty repairs of modules or cables which have been soldered by the user.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eincl. red display cover and four black M3 screws and distance rolls for mounting the front panel on the pc board\u003cbr data-mce-fragment=\"1\"\u003eThe display cover has to be glued by the customer at the front panel.\u003cbr data-mce-fragment=\"1\"\u003emade of 1 mm steel plate, about 110 x 86 mm, black coated with white printing\u003cbr data-mce-fragment=\"1\"\u003efour 3mm holes for mounting the pc board on the front panel are available\u003cbr data-mce-fragment=\"1\"\u003eholes for mounting the front panel on a base or housing have to be drilled by the customer because the positions and diameters of these holes depend upon the mechanical construction \u003cbr data-mce-fragment=\"1\"\u003eEven the mounting material for this purpose has to be added by the customer (e.g. suitable woodscrews or self-tapping screws or other screws)\u003cbr\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":45788346745002,"sku":"","price":351.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/files\/MKE-Komplettpaket.jpg?v=1713209956"},{"product_id":"instruo-lion-replacement-pins","title":"Instruo - Lìon Replacement Pins","description":"\u003ch2\u003eInstruo Lìon Replacement Pins\u003c\/h2\u003e\n\u003cp\u003eThis pack of replacement patch pins and insert cables for the Instruo Lìon Matrix Mixer ensures you're never without the means to make modular connections. Whether you're needing more insert points for flexible effects routing, or need additional patch points to enable sprawling feedback patching and more, this pack has you covered. Just like the ones included with the Lìon itself, the pack includes ten patch pins and two additional insert Y cables. Take your patches further with the Lìon Replacement Pins pack from Instruo.\u003c\/p\u003e\n\u003ch2\u003eLìon Replacement Pins Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement pack of pins and inserts for the Instruo Lìon Matrix Mixer\u003c\/li\u003e\n\u003cli\u003eIncludes 10x patch pins\u003c\/li\u003e\n\u003cli\u003eIncludes 2x Insert Y cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"product__info-short\" id=\"specification\"\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for the Instruo Lìon Matrix Mixer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Instruo","offers":[{"title":"Default Title","offer_id":67695406219434,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/files\/Instruo_Lion_Replacement_Pins_N13-10100_01.jpg?v=1792526347"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0020\/5199\/7743\/collections\/3U_Accessories.jpg?v=1702494871","url":"https:\/\/www.noisebug.live\/collections\/eurorack-accessories.oembed","provider":"Noisebug","version":"1.0","type":"link"}